M. Jamal Deen


2021

DOI bib
A reusable, reagent-less free chlorine sensor using gold thin film electrode
Arif Ul Alam, Dennis Clyne, Will Lush, M. Jamal Deen
The Analyst, Volume 146, Issue 8

Free chlorine is widely used as a disinfectant in the water industry.

DOI bib
A Low-Cost Multi-Parameter Water Quality Monitoring System
Arif Ul Alam, Dennis Clyne, M. Jamal Deen
Sensors, Volume 21, Issue 11

Multi-parameter water quality monitoring is crucial in resource-limited areas to provide persistent water safety. Conventional water monitoring techniques are time-consuming, require skilled personnel, are not user-friendly and are incompatible with operating on-site. Here, we develop a multi-parameter water quality monitoring system (MWQMS) that includes an array of low-cost, easy-to-use, high-sensitivity electrochemical sensors, as well as custom-designed sensor readout circuitry and smartphone application with wireless connectivity. The system overcomes the need of costly laboratory-based testing methods and the requirement of skilled workers. The proposed MWQMS system can simultaneously monitor pH, free chlorine, and temperature with sensitivities of 57.5 mV/pH, 186 nA/ppm and 16.9 mV/°C, respectively, as well as sensing of BPA with <10 nM limit of detection. The system also provides seamless interconnection between transduction of the sensors’ signal, signal processing, wireless data transfer and smartphone app-based operation. This interconnection was accomplished by fabricating nanomaterial and carbon nanotube-based sensors on a common substrate, integrating these sensors to a readout circuit and transmitting the sensor data to an Android application. The MWQMS system provides a general platform technology where an array of other water monitoring sensors can also be easily integrated and programmed. Such a system can offer tremendous opportunity for a broad range of environmental monitoring applications.

DOI bib
Fruit Quality Monitoring with Smart Packaging
Arif Ul Alam, Pranali Rathi, Heba Beshai, Gursimran K. Sarabha, M. Jamal Deen
Sensors, Volume 21, Issue 4

Smart packaging of fresh produce is an emerging technology toward reduction of waste and preservation of consumer health and safety. Smart packaging systems also help to prolong the shelf life of perishable foods during transport and mass storage, which are difficult to regulate otherwise. The use of these ever-progressing technologies in the packaging of fruits has the potential to result in many positive consequences, including improved fruit quality, reduced waste, and associated improved public health. In this review, we examine the role of smart packaging in fruit packaging, current-state-of-the-art, challenges, and prospects. First, we discuss the motivation behind fruit quality monitoring and maintenance, followed by the background on the development process of fruits, factors used in determining fruit quality, and the classification of smart packaging technologies. Then, we discuss conventional freshness sensors for packaged fruits including direct and indirect freshness indicators. After that, we provide examples of possible smart packaging systems and sensors that can be used in monitoring fruits quality, followed by several strategies to mitigate premature fruit decay, and active packaging technologies. Finally, we discuss the prospects of smart packaging application for fruit quality monitoring along with the associated challenges and prospects.

DOI bib
Nanomaterials in Smart Packaging Applications: A Review
Junaid A. Siddiqui, Mahtab Taheri, Arif Ul Alam, M. Jamal Deen
Small, Volume 18, Issue 1

Food wastage is a critical and world-wide issue resulting from an excess of food supply, poor food storage, poor marketing, and unstable markets. Since food quality depends on consumer standards, it becomes necessary to monitor the quality to ensure it meets those standards. Embedding sensors with active nanomaterials in food packaging enables customers to monitor the quality of their food in real-time. Though there are many different sensors that can monitor food quality and safety, pH sensors and time-temperature indicators (TTIs) are the most critical metrics in indicating quality. This review showcases some of the recent progress, their importance, preconditions, and the various future needs of pH sensors and TTIs in food packaging for smart sensors in food packaging applications. In discussing these topics, this review includes the materials used to make these sensors, which vary from polymers, metals, metal-oxides, carbon-based materials; and their modes of fabrication, ranging from thin or thick film deposition methods, solution-based chemistry, and electrodeposition. By discussing the use of these materials, novel fabrication process, and problems for the two sensors, this review offers solutions to a brighter future for the use of nanomaterials for pH indicator and TTIs in food packaging applications.

2020

DOI bib
Bisphenol A Electrochemical Sensor Using Graphene Oxide and β-Cyclodextrin-Functionalized Multi-Walled Carbon Nanotubes
Arif Ul Alam, M. Jamal Deen
Analytical Chemistry, Volume 92, Issue 7

Bisphenol A, an endocrine disrupting compound, is widely used in food and beverage packaging, and it then leaches in food and source water cycles, and thus must be monitored. Here, we report a simple, low-cost and sensitive electrochemical sensor using graphene oxide and β-cyclodextrin functionalized multiwalled carbon nanotubes for the detection of BPA in water. This sensor electrode system combines the high surface area of graphene oxide and carbon nanotubes, and the superior host-guest interaction capability of β-cyclodextrin. A diffusion-controlled oxidation reaction involving equal numbers of protons and electrons facilitated the electrochemical sensing of BPA. The sensor showed a two-step linear response from 0.05 to 5 μM and 5-30 μM with a limit of detection of 6 nM. The sensors also exhibited a reproducible and stable response over one month with negligible interference from common inorganic and organic species, and an excellent recovery with real water samples. The proposed electrochemical sensor can be promising for the development of simple low-cost water quality monitoring system for monitoring of BPA in water.

DOI bib
Fully Integrated, Simple, and Low-Cost Electrochemical Sensor Array for in Situ Water Quality Monitoring
Arif Ul Alam, Dennis Clyne, Hao Jin, Nan-Xing Hu, M. Jamal Deen
ACS Sensors, Volume 5, Issue 2

Rapid, accurate and inexpensive monitoring of water quality parameters is indispensable for continued water safety, especially in resource-limited areas. Most conventional sensing systems either can only monitor one parameter at a time or lack user-friendly on-site monitoring capabilities. A fully integrated electrochemical sensor array is an excellent solution to this barrier. Electrochemical sensing methods involve transduction of water quality parameters where chemical interactions are converted to electrical signals. The challenge remains in designing low-cost, easy-to-use, and highly sensitive sensor array that can continuously monitor major water quality parameters such as pH, free chlorine, temperature along with emerging pharmaceutical contaminants, and heavy metal without the use of expensive laboratory-based techniques and trained personnel. Here, we overcame this challenge through realizing a fully integrated electrochemical sensing system that offers simultaneous monitoring of pH (57.5 mV/pH), free chlorine (186 nA/ppm), and temperature (16.9 mV/°C) and on-demand monitoring of acetaminophen and 17β-estradiol (<10 nM) and heavy metal (<10 ppb), bridging the technological gap between signal transduction, processing, wireless transmission, and smartphone interfacing. This was achieved by merging nanomaterials and carbon nanotube-based sensors fabricated on microscopic glass slides controlled by a custom-designed readout circuit, a potentiostat, and an Android app. The sensing system can be easily modified and programmed to integrate other sensors, a capability that can be exploited to monitor a range of water quality parameters. We demonstrate the integrated system for monitoring tap, swimming pool, and lake water. This system opens the possibility for a wide range of low-cost and ubiquitous environmental monitoring applications.

DOI bib
Freshness Monitoring of Packaged Vegetables
Heba Beshai, Gursimran K. Sarabha, Pranali Rathi, Arif Ul Alam, M. Jamal Deen
Applied Sciences, Volume 10, Issue 21

Smart packaging is an emerging technology that has a great potential in solving conventional food packaging problems and in meeting the evolving packaged vegetables market needs. The advantages of using such a system lies in extending the shelf life of products, ensuring the safety and the compliance of these packages while reducing the food waste; hence, lessening the negative environmental impacts. Many new concepts were developed to serve this purpose, especially in the meat and fish industry with less focus on fruits and vegetables. However, making use of these evolving technologies in packaging of vegetables will yield in many positive outcomes. In this review, we discuss the new technologies and approaches used, or have the potential to be used, in smart packaging of vegetables. We describe the technical aspects and the commercial applications of the techniques used to monitor the quality and the freshness of vegetables. Factors affecting the freshness and the spoilage of vegetables are summarized. Then, some of the technologies used in smart packaging such as sensors, indicators, and data carriers that are integrated with sensors, to monitor and provide a dynamic output about the quality and safety of the packaged produce are discussed. Comparison between various intelligent systems is provided followed by a brief review of active packaging systems. Finally, challenges, legal aspects, and limitations facing this smart packaging industry are discussed together with outlook and future improvements.

2019

DOI bib
Electrochemical sensing of lead in drinking water using β-cyclodextrin-modified MWCNTs
Arif Ul Alam, Matiar R. Howlader, Nan-Xing Hu, M. Jamal Deen
Sensors and Actuators B: Chemical, Volume 296

Heavy metal pollution is a severe environmental problem affecting many water resources. The non-biodegradable nature of the heavy metals such as lead (Pb) causes severe human health issues, so their cost-effective, sensitive and rapid detection is needed. In this work, we describe a simple, facile and low cost modifications of multiwalled carbon nanotubes (MWCNT) and \b{eta}-cyclodextrin (\b{eta}CD) through non-covalent/physical (Phys) and a covalent Steglich esterification (SE) approaches. The Phys modification approach resulted Pb detection with a limit-of-detection (LoD) of 0.9 ppb, while the SE approach showed an LoD of 2.3 ppb, both of which are well below the WHO Pb concentration guideline of 10 ppb. The MWCNT-\b{eta}CD (Phys) based electrodes show negligible interference with other common heavy metal ions such as Cd2+ and Zn2+. The MWCNT-\b{eta}CD based electrodes were of low-cost owing to their simple synthesis approaches, exhibited good selectivity and reusability. The proposed MWCNT-\b{eta}CD based electrodes is a promising technology in developing a highly affordable and sensitive electrochemical sensing system of Pb in drinking water.

2018

DOI bib
Integrated water quality monitoring system with pH, free chlorine, and temperature sensors
Yiheng Qin, Arif Ul Alam, Si Pan, M. M. R. Howlader, Raja Ghosh, Nan-Xing Hu, Hao Jin, Shurong Dong, Chih‐Hung Chen, M. Jamal Deen
Sensors and Actuators B: Chemical, Volume 255

Abstract Accurate, efficient, inexpensive, and multi-parameter monitoring of water quality parameters is critical for continued water safety from developed urban regions to resource-limited or sparsely populated areas. This study describes an integrated sensing system with solution-processed pH, free chlorine, and temperature sensors on a common glass substrate. The pH and temperature sensors are fabricated by low-cost inkjet printing of palladium/palladium oxide and silver. The potentiometric pH sensor has a high sensitivity of 60.6 mV/pH and a fast response of 15 s. The Wheatstone-bridge-based temperature sensor shows an immediate response of 3.35 mV/°C towards temperature change. The free chlorine sensor is based on an electrochemically modified pencil lead, which exhibits a stable and reproducible sensitivity of 342 nA/ppm for hypochlorous acid. Such a free chlorine sensor is potentiostat-free and calibration-free, so it is easy-to-use. The three sensors are connected to a field-programmable gate array board for data collection, analysis and display, with real-time pH and temperature compensation for free chlorine sensing. The developed sensing system is user-friendly, cost-effective, and can monitor water samples in real-time with an accuracy of >82%. This platform enables water quality monitoring by nonprofessionals in a simple manner.