Crop–water interactions define productivity in water-limited dryland agricultural production systems in cold regions. Despite the agronomic and economic importance of this relationship there are challenges in quantifying crop water use efficiency (WUE). To understand dynamics driving crop water use and agricultural productivity in these environments, observations of evapotranspiration, carbon assimilation, meteorology, and crop growth were collected over 17 site-years at 5 agricultural sites in the sub-humid continental Canadian Prairies. Eddy-covariance (EC) derived water and carbon fluxes provided a means to comprehensively assess the WUE of current agricultural practices by both physiological (WUEP: g C kg−1 H2O) and agronomic (WUEY): kg yield mm H2O−1 hectare−1) approaches. Mean field scale WUEY for grain yields were 10.4 (Barley), 10.2 (Wheat), 6.0 (Canola), 19.3 (Peas), 12.2 (Lentils) and for silage/forage crops were 23.0 (Barley), 11.9 (Forage), and 20.7 (Corn) (kg yield mm H2O−1 hectare−1). An assessment of environmental factors and their covariance with WUE, utilising a conditional inference tree approach, demonstrated that WUE decreased when crops were under greater evapotranspiration demands. EC-based areal WUE approaches, measuring fluxes over footprints of hundreds of square metres, were compared with more commonly reported point-scale water balance residual approaches (WUEWB) and demonstrated consistently smaller magnitudes. WUEWB was greater than EC-estimated WUEY by an average of 52% and 65% for grain and forage/silage crops respectively. WUEWB also had greater variability than EC estimates, with standard deviations 188% and 128% greater than Barley and Wheat crops, respectively. This comparison highlights the scale dependency of WUE estimation methods, demonstrates considerable uncertainty in point scale water balance approaches due to spatial variability in crop–water interactions, and shows how this variability can be accounted for by EC observations. This improves the understanding of WUE and quantifies its variability in cold continental water-limited climates and provides a means to diagnose improved agricultural water management.

Crop–water interactions define productivity in water-limited dryland agricultural production systems in cold regions. Despite the agronomic and economic importance of this relationship there are challenges in quantifying crop water use efficiency (WUE). To understand dynamics driving crop water use and agricultural productivity in these environments, observations of evapotranspiration, carbon assimilation, meteorology, and crop growth were collected over 17 site-years at 5 agricultural sites in the sub-humid continental Canadian Prairies. Eddy-covariance (EC) derived water and carbon fluxes provided a means to comprehensively assess the WUE of current agricultural practices by both physiological (WUEP: g C kg−1 H2O) and agronomic (WUEY): kg yield mm H2O−1 hectare−1) approaches. Mean field scale WUEY for grain yields were 10.4 (Barley), 10.2 (Wheat), 6.0 (Canola), 19.3 (Peas), 12.2 (Lentils) and for silage/forage crops were 23.0 (Barley), 11.9 (Forage), and 20.7 (Corn) (kg yield mm H2O−1 hectare−1). An assessment of environmental factors and their covariance with WUE, utilising a conditional inference tree approach, demonstrated that WUE decreased when crops were under greater evapotranspiration demands. EC-based areal WUE approaches, measuring fluxes over footprints of hundreds of square metres, were compared with more commonly reported point-scale water balance residual approaches (WUEWB) and demonstrated consistently smaller magnitudes. WUEWB was greater than EC-estimated WUEY by an average of 52% and 65% for grain and forage/silage crops respectively. WUEWB also had greater variability than EC estimates, with standard deviations 188% and 128% greater than Barley and Wheat crops, respectively. This comparison highlights the scale dependency of WUE estimation methods, demonstrates considerable uncertainty in point scale water balance approaches due to spatial variability in crop–water interactions, and shows how this variability can be accounted for by EC observations. This improves the understanding of WUE and quantifies its variability in cold continental water-limited climates and provides a means to diagnose improved agricultural water management.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract Space-based, global-extent digital elevation models (DEMs) are key inputs to many Earth sciences applications. However, many of these applications require the use of a ‘bare-Earth’ DEM versus a digital surface model (DSM), the latter of which may include systematic positive biases due to tree canopies in forested areas. Critical topographic features may be obscured by these biases. Vegetation-free datasets have been created by using statistical relationships and machine learning to train on local-scale datasets (e.g., lidar) to de-bias the global-extent datasets. Recent advances in satellite platforms coupled with increased availability of computational resources and lidar reference products has allowed for a new generation of vegetation- and urban-canopy removals. One of these is the Forest And Buildings removed Copernicus DEM (FABDEM), based on the most recent and most accurate global DSM Copernicus-30. Among the more challenging landscapes to quantify surface elevations are densely forested mountain catchments, where even airborne lidar applications struggle to capture surface returns. The increasing affordability and availability of UAV-based lidar platforms have resulted in new capacity to fly modest spatial extents with unrivalled point densities. These data allow an unprecedented ability to validate global sub-canopy DEMs against representative UAV-based lidar data. In this work, the FABDEM is validated against up-scaled lidar data in a steep and forested mountain catchment considering elevation, slope, and Terrain Position Index (TPI) metrics. Comparisons of FABDEM with SRTM, MERIT, and the Copernicus-30 dataset are made. It was found that the FABDEM had a 24% reduction in elevation RMSE and a 135% reduction in bias compared to the Copernicus-30 dataset. Overall, the FABDEM provides a clear improvement over existing deforested DEM products in complex mountain topography such as the MERIT DEM. This study supports the use of FABDEM in forested mountain catchments as the current best-in-class data product.

Abstract Space-based, global-extent digital elevation models (DEMs) are key inputs to many Earth sciences applications. However, many of these applications require the use of a ‘bare-Earth’ DEM versus a digital surface model (DSM), the latter of which may include systematic positive biases due to tree canopies in forested areas. Critical topographic features may be obscured by these biases. Vegetation-free datasets have been created by using statistical relationships and machine learning to train on local-scale datasets (e.g., lidar) to de-bias the global-extent datasets. Recent advances in satellite platforms coupled with increased availability of computational resources and lidar reference products has allowed for a new generation of vegetation- and urban-canopy removals. One of these is the Forest And Buildings removed Copernicus DEM (FABDEM), based on the most recent and most accurate global DSM Copernicus-30. Among the more challenging landscapes to quantify surface elevations are densely forested mountain catchments, where even airborne lidar applications struggle to capture surface returns. The increasing affordability and availability of UAV-based lidar platforms have resulted in new capacity to fly modest spatial extents with unrivalled point densities. These data allow an unprecedented ability to validate global sub-canopy DEMs against representative UAV-based lidar data. In this work, the FABDEM is validated against up-scaled lidar data in a steep and forested mountain catchment considering elevation, slope, and Terrain Position Index (TPI) metrics. Comparisons of FABDEM with SRTM, MERIT, and the Copernicus-30 dataset are made. It was found that the FABDEM had a 24% reduction in elevation RMSE and a 135% reduction in bias compared to the Copernicus-30 dataset. Overall, the FABDEM provides a clear improvement over existing deforested DEM products in complex mountain topography such as the MERIT DEM. This study supports the use of FABDEM in forested mountain catchments as the current best-in-class data product.

Abstract. The US Northern Great Plains and the Canadian Prairies are known as the world’s breadbaskets for its large spring wheat production and exports to the world. It is essential to accurately represent spring wheat growing dynamics and final yield and improve our ability to predict food production under climate change. This study attempts to incorporate spring wheat growth dynamics into the Noah-MP crop model, for a long time period (13-year) and fine spatial scale (4-km). The study focuses on three aspects: (1) developing and calibrating the spring wheat model at point-scale, (2) applying a dynamic planting/harvest date to facilitate large-scale simulations, and (3) applying a temperature stress function to assess crop responses to heat stress amid extreme heat. Model results are evaluated using field observations, satellite leaf area index (LAI), and census data from Statistics Canada and the US Department of Agriculture (USDA). Results suggest that incorporating a dynamic planting/harvest threshold can better constrain the growing season, especially the peak timing and magnitude of wheat LAI, as well as obtain realistic yield compared to prescribing a static province/state-level map. Results also demonstrate an evident control of heat stress upon wheat yield in three Canadian Prairies Provinces, which are reasonably captured in the new temperature stress function. This study has important implications for estimating crop production, simulating the land-atmosphere interactions in croplands, and crop growth’s responses to the raising temperatures amid climate change.

Abstract. The US Northern Great Plains and the Canadian Prairies are known as the world’s breadbaskets for its large spring wheat production and exports to the world. It is essential to accurately represent spring wheat growing dynamics and final yield and improve our ability to predict food production under climate change. This study attempts to incorporate spring wheat growth dynamics into the Noah-MP crop model, for a long time period (13-year) and fine spatial scale (4-km). The study focuses on three aspects: (1) developing and calibrating the spring wheat model at point-scale, (2) applying a dynamic planting/harvest date to facilitate large-scale simulations, and (3) applying a temperature stress function to assess crop responses to heat stress amid extreme heat. Model results are evaluated using field observations, satellite leaf area index (LAI), and census data from Statistics Canada and the US Department of Agriculture (USDA). Results suggest that incorporating a dynamic planting/harvest threshold can better constrain the growing season, especially the peak timing and magnitude of wheat LAI, as well as obtain realistic yield compared to prescribing a static province/state-level map. Results also demonstrate an evident control of heat stress upon wheat yield in three Canadian Prairies Provinces, which are reasonably captured in the new temperature stress function. This study has important implications for estimating crop production, simulating the land-atmosphere interactions in croplands, and crop growth’s responses to the raising temperatures amid climate change.

Abstract. The US Northern Great Plains and the Canadian Prairies are known as the world's breadbaskets for their large spring wheat production and exports to the world. It is essential to accurately represent spring wheat growing dynamics and final yield and improve our ability to predict food production under climate change. This study attempts to incorporate spring wheat growth dynamics into the Noah-MP crop model for a long time period (13 years) and fine spatial scale (4 km). The study focuses on three aspects: (1) developing and calibrating the spring wheat model at a point scale, (2) applying a dynamic planting and harvest date to facilitate large-scale simulations, and (3) applying a temperature stress function to assess crop responses to heat stress amid extreme heat. Model results are evaluated using field observations, satellite leaf area index (LAI), and census data from Statistics Canada and the United States Department of Agriculture (USDA). Results suggest that incorporating a dynamic planting and harvest threshold can better constrain the growing season, especially the peak timing and magnitude of wheat LAI, as well as obtain realistic yield compared to prescribing a static province/state-level map. Results also demonstrate an evident control of heat stress upon wheat yield in three Canadian Prairies Provinces, which are reasonably captured in the new temperature stress function. This study has important implications in terms of estimating crop yields, modeling the land–atmosphere interactions in agricultural areas, and predicting crop growth responses to increasing temperatures amidst climate change.

Abstract. The US Northern Great Plains and the Canadian Prairies are known as the world's breadbaskets for their large spring wheat production and exports to the world. It is essential to accurately represent spring wheat growing dynamics and final yield and improve our ability to predict food production under climate change. This study attempts to incorporate spring wheat growth dynamics into the Noah-MP crop model for a long time period (13 years) and fine spatial scale (4 km). The study focuses on three aspects: (1) developing and calibrating the spring wheat model at a point scale, (2) applying a dynamic planting and harvest date to facilitate large-scale simulations, and (3) applying a temperature stress function to assess crop responses to heat stress amid extreme heat. Model results are evaluated using field observations, satellite leaf area index (LAI), and census data from Statistics Canada and the United States Department of Agriculture (USDA). Results suggest that incorporating a dynamic planting and harvest threshold can better constrain the growing season, especially the peak timing and magnitude of wheat LAI, as well as obtain realistic yield compared to prescribing a static province/state-level map. Results also demonstrate an evident control of heat stress upon wheat yield in three Canadian Prairies Provinces, which are reasonably captured in the new temperature stress function. This study has important implications in terms of estimating crop yields, modeling the land–atmosphere interactions in agricultural areas, and predicting crop growth responses to increasing temperatures amidst climate change.

• Snow, glaciers, wetlands, frozen ground and permafrost needed in hydrological models. • Water quality export by coupling biochemical transformations to cold regions processes. • Hydrological sensitivity to land use depends on cold regions processes. • Strong cold regions hydrological sensitivity to climate warming. Cold regions involve hydrological processes that are not often addressed appropriately in hydrological models. The Cold Regions Hydrological Modelling platform (CRHM) was initially developed in 1998 to assemble and explore the hydrological understanding developed from a series of research basins spanning Canada and international cold regions. Hydrological processes and basin response in cold regions are simulated in a flexible, modular, object-oriented, multiphysics platform. The CRHM platform allows for multiple representations of forcing data interpolation and extrapolation, hydrological model spatial and physical process structures, and parameter values. It is well suited for model falsification, algorithm intercomparison and benchmarking, and has been deployed for basin hydrology diagnosis, prediction, land use change and water quality analysis, climate impact analysis and flood forecasting around the world. This paper describes CRHM’s capabilities, and the insights derived by applying the model in concert with process hydrology research and using the combined information and understanding from research basins to predict hydrological variables, diagnose hydrological change and determine the appropriateness of model structure and parameterisations.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract. Vegetation has a tremendous influence on snow processes and snowpack dynamics, yet remote sensing techniques to resolve the spatial variability of sub-canopy snow depth are not always available and are difficult from space-based platforms. Unmanned aerial vehicles (UAVs) have had recent widespread application to capture high-resolution information on snow processes and are herein applied to the sub-canopy snow depth challenge. Previous demonstrations of snow depth mapping with UAV structure from motion (SfM) and airborne lidar have focussed on non-vegetated surfaces or reported large errors in the presence of vegetation. In contrast, UAV-lidar systems have high-density point clouds and measure returns from a wide range of scan angles, increasing the likelihood of successfully sensing the sub-canopy snow depth. The effectiveness of UAV lidar and UAV SfM in mapping snow depth in both open and forested terrain was tested in a 2019 field campaign at the Canadian Rockies Hydrological Observatory, Alberta, and at Canadian prairie sites near Saskatoon, Saskatchewan, Canada. Only UAV lidar could successfully measure the sub-canopy snow surface with reliable sub-canopy point coverage and consistent error metrics (root mean square error (RMSE) <0.17 m and bias −0.03 to −0.13 m). Relative to UAV lidar, UAV SfM did not consistently sense the sub-canopy snow surface, the interpolation needed to account for point cloud gaps introduced interpolation artefacts, and error metrics demonstrated relatively large variability (RMSE<0.33 m and bias 0.08 to −0.14 m). With the demonstration of sub-canopy snow depth mapping capabilities, a number of early applications are presented to showcase the ability of UAV lidar to effectively quantify the many multiscale snow processes defining snowpack dynamics in mountain and prairie environments.

Abstract. Meteorological, snow survey, streamflow, and groundwater data are presented from Marmot Creek Research Basin, Alberta, Canada. The basin is a 9.4 km2, alpine–montane forest headwater catchment of the Saskatchewan River basin that provides vital water supplies to the Prairie Provinces of Canada. It was heavily instrumented, experimented upon, and operated by several federal government agencies between 1962 and 1986, during which time its main and sub-basin streams were gauged, automated meteorological stations at multiple elevations were installed, groundwater observation wells were dug and automated, and frequent manual measurements of snow accumulation and ablation and other weather and water variables were made. Over this period, mature evergreen forests were harvested in two sub-basins, leaving large clear cuts in one basin and a “honeycomb” of small forest clearings in another basin. Whilst meteorological measurements and sub-basin streamflow discharge weirs in the basin were removed in the late 1980s, the federal government maintained the outlet streamflow discharge measurements and a nearby high-elevation meteorological station, and the Alberta provincial government maintained observation wells and a nearby fire weather station. Marmot Creek Research Basin was intensively re-instrumented with 12 automated meteorological stations, four sub-basin hydrometric sites, and seven snow survey transects starting in 2004 by the University of Saskatchewan Centre for Hydrology. The observations provide detailed information on meteorology, precipitation, soil moisture, snowpack, streamflow, and groundwater during the historical period from 1962 to 1987 and the modern period from 2005 to the present time. These data are ideal for monitoring climate change, developing hydrological process understanding, evaluating process algorithms and hydrological, cryospheric, or atmospheric models, and examining the response of basin hydrological cycling to changes in climate, extreme weather, and land cover through hydrological modelling and statistical analyses. The data presented are publicly available from Federated Research Data Repository (https://doi.org/10.20383/101.09, Fang et al., 2018).

Abstract. Local-scale advection of energy from warm snow-free surfaces to cold snow-covered surfaces is an important component of the energy balance during snow-cover depletion. Unfortunately, this process is difficult to quantify in one-dimensional snowmelt models. This paper proposes a simple sensible and latent heat advection model for snowmelt situations that can be readily coupled to one-dimensional energy balance snowmelt models. An existing advection parameterization was coupled to a conceptual frozen soil infiltration surface water retention model to estimate the areal average sensible and latent heat advection contributions to snowmelt. The proposed model compared well with observations of latent and sensible heat advection, providing confidence in the process parameterizations and the assumptions applied. Snow-covered area observations from unmanned aerial vehicle imagery were used to update and evaluate the scaling properties of snow patch area distribution and lengths. Model dynamics and snowmelt implications were explored within an idealized modelling experiment, by coupling to a one-dimensional energy balance snowmelt model. Dry, snow-free surfaces were associated with advection of dry air that compensated for positive sensible heat advection fluxes and so limited the net influence of advection on snowmelt. Latent and sensible heat advection fluxes both contributed positive fluxes to snow when snow-free surfaces were wet and enhanced net advection contributions to snowmelt. The increased net advection fluxes from wet surfaces typically develop towards the end of snowmelt and offset decreases in the one-dimensional areal average melt energy that declines with snow-covered area. The new model can be readily incorporated into existing one-dimensional snowmelt hydrology and land surface scheme models and will foster improvements in snowmelt understanding and predictions.

Spring snowmelt is the most important hydrological event in agricultural cold regions, recharging soil moisture and generating the majority of annual runoff. Melting agricultural snowcovers are pat...

Abstract On the Canadian Prairies, agricultural practices result in millions of hectares of standing crop stubble that gradually emerges during snowmelt. The importance of stubble in trapping wind-blown snow and retaining winter snowfall has been well demonstrated. However, stubble is not explicitly accounted for in hydrological or energy balance snowmelt models. This paper relates measurable stubble parameters (height, width, areal density, and albedo) to the snowpack energy balance and snowmelt with the new, physically based Stubble–Snow–Atmosphere Model (SSAM). Novel process representations of SSAM quantify the attenuation of shortwave radiation by exposed stubble, the sky and vegetation view factors needed to solve longwave radiation terms, and a resistance scheme for stubble–snow–atmosphere fluxes to solve for surface temperatures and turbulent fluxes. SSAM results were compared to observations of radiometric snow-surface temperature, stubble temperature, snow-surface solar irradiance, areal-average turbulent fluxes, and snow water equivalent from two intensive field campaigns during snowmelt in 2015 and 2016 over wheat and canola stubble in Saskatchewan, Canada. Uncalibrated SSAM simulations compared well with these observations, providing confidence in the model structure and parameterization. A sensitivity analysis conducted using SSAM revealed compensatory relationships in energy balance terms that result in a small increase in net snowpack energy as stubble exposure increases.

The breakup of snow cover into patches during snowmelt leads to a dynamic, heterogeneous land surface composed of melting snow, and wet and dry soil and plant surfaces. Energy exchange with the atmosphere is therefore complicated by horizontal gradients in surface temperature and humidity as snow surface temperature and humidity are regulated by the phase change of melting snow unlike snow-free areas. Airflow across these surface transitions results in local-scale advection of energy that has been documented as sensible heat during snowmelt, while latent heat advection has received scant attention. Herein, results are presented from an experiment measuring near-surface profiles of air temperature and humidity across snow-free to snow-covered transitions that demonstrates that latent heat advection can be the same order of magnitude as sensible heat advection and is therefore an important source of snowmelt energy. Latent heat advection is conditional on an upwind source of water vapor from a wetted snow-free surface.